Add Hurst Performance To Your Car With The 5010002 3-Speed Indy Shifter
The Hurst Indy 3-speed shifters are designed to fit most popular passenger cars with 3-speed manual transmissions. These shifters are excellent for converting column shifters or for replacing floor shifters. They sport an attractive chrome-plated stick and gate, and come with all hardware and instructions.
• Spring loaded gate for ease of operation
• Short precise throws for less stick travel
• Attractive chrome-plated stick (3/8-24 thread) can be adjusted to many positions
• Excellent for replacing floor shifter or for conversion column shifter
• Fits most popular passenger cars with 3-speed manual transmissions
• All components are plated for protection
• Complete with shifter boot, hardware and easy-to-follow installation guide
Hurst 5010002 3 Speed Shifter Indy SSA Universal
For more information, including other Hurst products, visit the Hurst page at performanceparts.com.
Superchips TIREPAQ 2816 Speedometer Correction Device For ‘96-’07 GM Trucks & SUVs
Superchips proudly introduces the Tirepaq (Superchips 2816) for 1996-2007 gas-powered GM V8 trucks and SUVs. Superchip’s Tirepaq corrects your vehicle’s speedometer readings electronically to compensate for non-factory wheels, tires and rear-end gear swaps. It also intuitively adjusts shift patterns to improve drivability when aftermarket wheels, tires and gears are installed. Superchips Tirepaq unit will never be out-of-date because you can update your Tirepaq on the internet!
Superchips Tirepaq programmer can also be used to retrieve and clear annoying “check engine” lights. The Tirepaq programmer can also be upgraded (at an additional cost) to become the Superchips Flashpaq performance programmer.
SUPERCHIPS TIREPAQ 2816 SPEEDOMETER CORRECTION DEVICE
For more information, including other Superchips products, visit the Superchips page at performanceparts.com.
New Dual Channel Wide Band O2 Kit 77063 From Accel/DFI
The new Accel/DFI O2 Control Kit is the fast and easy way to tune a carbureted or fuel injected engine for the most power and fuel efficiency!
Accel’s 77063 O2 Kit Operates either Bosch or NTK style linear sensor for added versatility. Every module of this all-new design is hand calibrated at the factory to ensure top-notch precision, repeatability, and reliability at an affordable price. It is also great for tuning Nitrous, Supercharged, or Turbocharged engines. Without knowing what the Air/Fuel ratio is, your chances of damaging your engine while tuning are greater.
DataMap software can monitor or record air/fuel ratio in one or two engine banks (depending on the model), engine RPM, and vehicle speed for EFI or carburetor stand alone applications — also includes two digital gauge outputs for remote A/F monitoring.
Accel 77063 Dual Channel Wide Band O2 Kit
For more information, including other Accel/DFI products, visit the Accel page at performanceparts.com.
Proform 141-108 Chevy Bowtie Die Cast Valve Covers
Proform has developed new Chevrolet Bowtie Die Cast Valve Covers (Proform 141-108) for the small-block Chevy. They’re tall, cast in aluminum and polished with the classic Chevy logo emblazoned on the top. They come with GM’s stamp of approval!
Why not get rid of your boring factory valve covers? Proform’s premium quality covers feature a sturdy die-cast aluminum casing with thick gasket rails to prevent oil leaks. Proform’s 141-108 are equipped with oil drippers and GM authorized baffles so you can be sure they’ll work great! The Proform covers have recessed Bowtie and Chevy red logos, and they’re available in your choice of chrome-plated, black crinkle, or polished finishes. These are sold as a pair.
Proform 141-108 Chevrolet Bowtie Die Cast Valve Covers
For more information, including other Proform products, visit the Proform page at performanceparts.com.
Add 11.62 HP to 6.0L Suburban & Yukon Engines With K&N’s 63-3063 AirCharger Intake
K&N Engineering has released an AirCharger Air Intake System (K&N 63-3063) for the 2007 GMC Yukon XL 2500 6.0L V8 engine and the 2007 Chevrolet Suburban 2500 6.0L V8 engine.
“These are big cars with 6 liter engines,” said K&N Performance Kit Manager Bert Heck. “We wanted to build an intake kit that helps this engine with additional horsepower. Our dynamometer testing shows a horse power gain of 11.62 @ 5075 RPM.”
K&N’s 63-3063 rotationally molded polyethylene intake kit uses a large chrome top K&N Air Filter (K&N RF-1042). “Our K&N Air Intake System replaces the restrictive stock air filter. The included heat shield isolates the filter element from the heat of the engine,” said Heck. “This results in cooler air going into the engine resulting in more power.”
It takes less than 90 minutes to install most K&N air intakes with simple hand tools. K&N air intakes come with the famous K&N Million Mile Warranty.
K&N 63-3063 AIRCHARGER AIR INTAKE SYSTEM
For more information, including other K&N products, visit the K&N page at performanceparts.com.
New From MSD Ignition: 6-MOD Ignition Controller MSD 6011
New technology to go old school! When you retro-fit a Ford 4.6L or 5.4L (SOHC/DOHC) with a carbureted intake manifold, you’ll need this new MSD Controller to handle the ignition chores.
The Controller plugs into the coil packs and sensors of the engine for a direct installation. From a PC, using MSD’s Pro-Data+ software, you can program custom timing curves, a step retard, two step and even a vacuum advance. A great system for street rods and retro muscle cars.
Other features include…
❚ Fire the coils and control the timing on Ford Modular engines with carburetors.
❚ Map a timing curve and a vacuum advance to meet your vehicle’s needs.
❚ Connects directly to the coils, crank, cam and MAP sensors for an easy installation.
❚ Program timing curves, rpm limits and a step retard with your PC.
MSD 6011 6-MOD INGNITION CONTROLLER
For more information, including other MSD products, visit the MSD page at performanceparts.com.
Program Power With The Accel 79100 Ford Power Processor!
ACCEL/DFI announces the availability of an all-new Power Processor — a revolutionary, ultra-light, handheld Flash Tool which is pre-programmed with 3 tune files each for the most popular Ford models. Designed with the latest available technology for unparalleled high-performance tuning, this all-in-one OBD II Flash Tool/Power Processor is available for most 1996 to 2006 Ford cars and trucks, both gasoline and diesel applications.
The ACCEL/DFI Power Processor significantly increases horsepower and torque, improves fuel economy, and optimizes operation of the engine and transmission. It also allows easy reading, clearing, and diagnosis of DTC trouble codes/Check Engine Lights, and has a USB interface to ensure quick file transfer. Power up your vehicle in less than 10 minutes, no tools needed - just plug it in!
Tuning available for all grades of fuel including a performance tune for increased power and drivability. Features include the ability to adjust shift points, adjust shift firmness, raise the top speed and engine rev limiters, recalibrate speedometers for rear gear change, and read and clear diagnostic trouble codes. Accel 79100 Fits most Ford Applications:
• 2003 to 2006 6.0L Diesel Trucks
• 1999 to 2003 7.3L Diesel Trucks
• 1996 to 2006 Mustang/Cobra
• 1999 to 2004 Lightning/Harley Trucks
• 1996 to 2006 F-Series Trucks
• 1996 to 2006 SUV’s including Excursion, Expedition, and Explorer.
• 1999 to 2004 Ford Focus Zetec
• 2003 to 2004 SVT Focus
• 2003 to 2004 Marauder
• 2005 to 2006 Ford GT Supercar
• 1996 to 2006 Ford *Other gas cars including T-bird and Lincoln LS
ACCEL 79100 FORD POWER PROGRAMMER
For more information, including other Accel products, visit the Accel page at performanceparts.com.
Raw Power For Big-Block Chevys With the Edelbrock 20654 RPM Dual-Quad Air-Gap Intake Manifold
Featuring the all-new RPM Air-Gap Dual-Quad intake manifold from Edelbrock - welcome to more horsepower and torque for your big-block Chevy!
Now, it’s easier than ever to update your vehicle’s induction system to a dual quad 
set-up with these manifold and carburetor kits from Edelbrock. No more choosing different parts, hoping the’ll work together. You get a perfectly matched combination of carburetor and manifold packed into one box. They sparkle in Edelbrock’s ultra-bright “Endurashine” finish. Every kit is complete and bolt-on ready, including two Edelbrock 500cfm Thunder Series AVS carburetors (one manual choke, one electric choke), an Edelbrock RPM Air Gap dual quad intake manifold, Edelbrock’s high tech progressive linkage, a Russell fuel line, a high quality Edelbrock gasket set, and a carburetor stud kit.
EDELBROCK 20654 RPM AIR GAP INTAKE MANIFOLD
For more information, including other Edelbrock products, visit the Edelbrock page at Performance Parts.
Dress Up & Cool Down Your Small-Block Ford Engine With Proform’s New 68220BK High Volume Water Pump
While heat creates horsepower it can also create internal engine chaos! Keeping your Ford small-block running within the correct heat range, during hot summer driving or off-road competition, is imperative. Proform/Specialty Auto Parts has the solution to overheating with this all new 12-volt electric water pump (P/N 68220BK). To add a custom touch, it’s also available in blue, red, chrome or polished. Dress up and cool down your engine at the same time!
This easy to install Proform pump will move 35+ gallons of water per minute while drawing only 6-Amps. These lightweight pumps are made from durable die-cast aluminum and then epoxy powder coated for corrosion resistance and a show quality appearance. Each pump includes a free billet aluminum backing plate, mating weather-tight connector and inlet fitting.
PROFORM 68220BK HIGH-VOLUME ELECTRIC WATER PUMP
For more information, including other Proform products, visit the Proform page at performanceparts.com.
Get High Oil Flow Rates In Your Ford Super Duty Truck With K&N HP-7009 Cartridge Oil Filter
The Ford F-550 Super Duty is in a class by itself.
Powered by a power stroke turbo diesel, it is considered the mega truck of the heavy hauling set. All the F-Series Super Duty models (F-550, F-450, F-350 and F-250) are big sellers for Ford. The company continues to manufacture them to supply consumer demand.
K&N Engineering has designed a cartridge oil filter (P/N HP-7009) for the Ford Super Duty Series. It is one of K&N’s first cartridge filters and designed to satisfy the needs of owners who want the very best oil filter available.
K&N HP-7009 Cartridge Oil Filter K&N Oil Filters are built from the ground up to trap harmful contaminants and allow for high oil flow rates. K&N’s HP-7009 slips into the OE housing for an easy fit. K&N’s Cartridge Oil Filters are covered by a limited warranty to be free of defects in material and workmanship when installed and replaced using the engine and equipment manufacturer’s recommended service interval.
K&N HP-7009 CARTRIDGE OIL FILTER
For more information, including other K&N products, visit the K&N page at performanceparts.com.