DEI 010102 Exhaust Wrap
Keep Your Cool!
Use Design Engineering’s asbestos-free DEI 010102 2in x 50ft exhaust wrap as a heat barrier to keep the engine and driving compartments cool. It also keeps wires and hoses from melting under extreme conditions, and controls heat in the exhaust system for a performance boost. 
DEI 010102
-
Reduce underhood temperatures a realistic 50%
-
Improves Horsepower
-
Designed to keep heat in the exhaust and evacuate it out of the engine compartment
Lakewood Introduces Hemi Bellhousing 15315
Lakewood Industries now offers part number Lakewood 15315, a SFI approved safety bellhousing for the 5.7L Hemi as 273-360 V8 engines. Designed to accept the popular tremec TKO 500/600 series 5-speed transmission. Lakewood supplies the SFI 6.1 rated bellhousing, safety block plate and all necessary mounting fasteners. The SFI specification applies to containment bellhousings for use with SFI 1.1 and 1.2 single and dual disc clutches assemblies for naturally aspirated vehicles.
Hypertech 41048 Power Programmer For Ford Mustang GT 4.6L
Hypertech is making their Power Programmer available for the 2005-2007 4.6L Ford Mustang GT, offering 22 optimized tuning programs, regular and premium fuel tuning for the stock air intake and for each of the 10 most popular Cold Air Intake Kits. Now you can have perfect air/fuel mixtures and spark advance no matter which air intake you have on your vehicle!
Additional features include: adjustable shifts points and firmness, adjustable tire and gear, adjustable rev limiter and top speed limiter, adjustable fans and Read & Clears factory DTCs.
HYPERTECH 41048 POWER PROGRAMMER FOR FORD MUSTANG GT 4.6L
See other Hypertech products.
Professional Products Intake Adapter Kit for FORD 5.4L
Ford’s 5.4L is becoming the performance choice for many performance Mustang builders, replacing the 4.6L engine as the larger displacement provides more power, but without a performance intake manifold the transplant is one step short. Professional Products has introduced a solution with its Professional Products 54110 4.6L to 5.4L Adapter Kit for Ford. This kit allows the installation of Professional Products 4.6L 2-valve Intake Manifold Professional Products 54060 -Satin finish or Professional Products 54061-polished, or any other 4.6L 2V manifold, to the 5.4L engine without additional modifications. The kit includes the two aluminum adapter plates, intake gaskets and all the necessary mounting hardware to help your Mustang breathe free and produce more power.
See PerformanceParts.com for more Professional Products parts.
12% HORSEPOWER GAIN WITH PROFORM CARB SPACER
Recent dyno testing at Adrenaline Autosports, in Chatsworth, CA, on a mildly built Ford 302, fitted with stock 289 heads, revealed incredible results. Baseline numbers with a 600-cfm Holley carb and no spacer produced 218.57 rear wheel horsepower at 5500 rpm with 252.97 ft-lbs. of torque. The carb was switched to a 680-cfm QFT street carb, manufactured with a Proform® carb main body, and one pull was made with each of the three variations of Proform 1-inch phenolic spacers supplied in their Trackside Carb Spacer kit.
The wide open spacer proved to be the most efficient for this engine, producing a whopping 244.62 rear wheel horsepower with 276.55 ft-lbs. of torque, equating to a 12% HP increase and , a 9% torque increase. That’s a gain of 26.5 horsepower and 23.58 ft-lbs. of torque with only a carb change and spacer install. We broke down the numbers for the spacer only, and this simple change resulted in an increase of 14 rear wheel horsepower and 9 ft-lbs. of torque. Incredible! and the 3-in-1 spacer kit is under $80. Now that’s a low cost power adder producing astounding results!
By simply changing the carb and adding the Proform 67160C spacer to this engine, we gained increased throttle response, realized the full power band of the engine, and at wide open throttle it felt like it would never stop pulling. That, coupled with the horsepower and torque increase, makes this combination a winner on street or strip.
Superchips TIREPAQ 2816 Speedometer Correction Device For ‘96-’07 GM Trucks & SUVs
Superchips proudly introduces the Tirepaq (Superchips 2816) for 1996-2007 gas-powered GM V8 trucks and SUVs. Superchip’s Tirepaq corrects your vehicle’s speedometer readings electronically to compensate for non-factory wheels, tires and rear-end gear swaps. It also intuitively adjusts shift patterns to improve drivability when aftermarket wheels, tires and gears are installed. Superchips Tirepaq unit will never be out-of-date because you can update your Tirepaq on the internet!
Superchips Tirepaq programmer can also be used to retrieve and clear annoying “check engine” lights. The Tirepaq programmer can also be upgraded (at an additional cost) to become the Superchips Flashpaq performance programmer.
SUPERCHIPS TIREPAQ 2816 SPEEDOMETER CORRECTION DEVICE
For more information, including other Superchips products, visit the Superchips page at performanceparts.com.
Is it Ever Advisable to Run Mechanical Lifters on Hydraulic Cams?
Crane Cams advises that IT IS NOT advisable to run mechanical lifters on a hydraulic camshaft. Although certain racing applications could benefit from the additional RPM potential of the mechanical lifters (and some racers do so), the ramp design of the hydraulic lobes is not designed for use with valve lash. The resulting harshness (as evidenced by valve train noise) will rapidly shorten the life of the camshaft and the lifters, and also the rest of the valvetrain components. Never run hydraulic lifters on a mechancial camshaft, as immediate lifter pump-up will occur, leading to a lack of performance and possible engine failure.
Edelbrock Performer Dual-Quad Crate Engine 45004 - Great For Street Rods & More!
Get a brand-new, fully-assembled engine that’s virtually ready to run and deliver classic Edelbrock performance right out-of-the-box. Available in seven power levels, Edelbrock Crate Engines include high-quality Edelbrock manifolds, carbs, cylinder heads, water pumps and camshafts. P/N 45004 is pictured.
Edelbrock Crate 45004 delivers 315 HP & 372 FT/LBS. of torque!
You can order the “Polished Package” or EnduraShine for a custom look. Each engine also comes standard with Edelbrock’s top-of-the-line carburetor, the ThunderSeries AVS. Performer Series carbs on street legal applications.
All engines include a new GM short-block with 4-bolt mains, and you can order yours with or without an Edelbrock water pump. Edelbrock aluminum valve covers are also included, complete with a custom badge. High quality MSD distributors and coils round off this unbeatable package.
EDELBROCK 45004 CRATE ENGINE 9.0:1
For more information, including other Edelbrock products, visit the Edelbrock page at performanceparts.com.
More Street Performance With MSD’S 8247 Multi-Spark Coils For GM Gen-III LS2/LS7 Engines
Many said it couldn’t be done, but MSD has done it! At last, a high-performance, multi-spark replacement coil for the remarkable GM Gen-III small block!The advanced electronic controls of the Gen-III engine presented MSD engineers with a formidable challenge, as the control drivers are built into the OE coils. MSD was able to design an advanced circuit that operates with the factory electronics of the Gen-III engine while producing a higher output spark. Not only do you get a higher voltage spark, but the coil will deliver multiple sparks! Yes, that’s right: multiple spark discharge coils!
This version of MSD’s multi-spark coil was designed for GM’s LS2 variant and will provide more spark than the stock components. MSD coils produce up to three times the spark energy of the factory coils, and multiple sparks help keep the engine clean at an idle. MSD’s new kit (MSD 82478) provides everything you need to install the coils on your car, including eight coils and mounting hardware.
MSD 8247 MULTI-SPARK COIL FOR LS2/LS7 (individual), MSD 82478 COIL KIT (set of eight)
For more information, including more MSD products, visit the MSD page at performanceparts.com.
Flashback For Flashpaq! Superchips 3805 For Dodge Cummins Diesel
Check out our post from January 8, 2007 that introduces an update for the Superchips 3805 Flashpaq, which now fits your 2003-2007 5.9L Dodge Cummins Diesel truck!
UPDATE: This is the first diesel application to benefit from the all new Superchips 3805 Flashpaq! The programmer features advanced tuning capabilities as well as engine monitoring features that will help you achieve the most power and economy from your diesel truck. The large LCD screen displays a large variety of options that you can modify to capture the full power of your diesel engine. It also has an web update capability as well as the ability to restore engine and transmission parameters to original settings.
Superchips 3805 Flashpaq for DODGE Diesel (Cummins)
For more information, see Superchips products on PerformanceParts.com.
See PerformanceParts.com for a complete list of Superchips Flashpaq programmers.