Proform 141-108 Chevy Bowtie Die Cast Valve Covers
Proform has developed new Chevrolet Bowtie Die Cast Valve Covers (Proform 141-108) for the small-block Chevy. They’re tall, cast in aluminum and polished with the classic Chevy logo emblazoned on the top. They come with GM’s stamp of approval!
Why not get rid of your boring factory valve covers? Proform’s premium quality covers feature a sturdy die-cast aluminum casing with thick gasket rails to prevent oil leaks. Proform’s 141-108 are equipped with oil drippers and GM authorized baffles so you can be sure they’ll work great! The Proform covers have recessed Bowtie and Chevy red logos, and they’re available in your choice of chrome-plated, black crinkle, or polished finishes. These are sold as a pair.
Proform 141-108 Chevrolet Bowtie Die Cast Valve Covers
For more information, including other Proform products, visit the Proform page at performanceparts.com.
Program Power With The Accel 79100 Ford Power Processor!
ACCEL/DFI announces the availability of an all-new Power Processor — a revolutionary, ultra-light, handheld Flash Tool which is pre-programmed with 3 tune files each for the most popular Ford models. Designed with the latest available technology for unparalleled high-performance tuning, this all-in-one OBD II Flash Tool/Power Processor is available for most 1996 to 2006 Ford cars and trucks, both gasoline and diesel applications.
The ACCEL/DFI Power Processor significantly increases horsepower and torque, improves fuel economy, and optimizes operation of the engine and transmission. It also allows easy reading, clearing, and diagnosis of DTC trouble codes/Check Engine Lights, and has a USB interface to ensure quick file transfer. Power up your vehicle in less than 10 minutes, no tools needed - just plug it in!
Tuning available for all grades of fuel including a performance tune for increased power and drivability. Features include the ability to adjust shift points, adjust shift firmness, raise the top speed and engine rev limiters, recalibrate speedometers for rear gear change, and read and clear diagnostic trouble codes. Accel 79100 Fits most Ford Applications:
• 2003 to 2006 6.0L Diesel Trucks
• 1999 to 2003 7.3L Diesel Trucks
• 1996 to 2006 Mustang/Cobra
• 1999 to 2004 Lightning/Harley Trucks
• 1996 to 2006 F-Series Trucks
• 1996 to 2006 SUV’s including Excursion, Expedition, and Explorer.
• 1999 to 2004 Ford Focus Zetec
• 2003 to 2004 SVT Focus
• 2003 to 2004 Marauder
• 2005 to 2006 Ford GT Supercar
• 1996 to 2006 Ford *Other gas cars including T-bird and Lincoln LS
ACCEL 79100 FORD POWER PROGRAMMER
For more information, including other Accel products, visit the Accel page at performanceparts.com.
Raw Power For Big-Block Chevys With Edelbrock’s New 20654 RPM Dual-Quad Air-Gap Intake Manifold
Featuring the all-new RPM Air-Gap Dual-Quad intake manifold from Edelbrock - welcome to more horsepower and torque for your big-block Chevy!
Now, it’s easier than ever to update your vehicle’s induction system to a dual quad set-up with these manifold and carburetor kits from Edelbrock. No more choosing different parts, hoping the’ll work together. You get a perfectly matched combination of carburetor and manifold packed into one box. They sparkle in Edelbrock’s ultra-bright “Endurashine” finish. Every kit is complete and bolt-on ready, including two Edelbrock 500cfm Thunder Series AVS carburetors (one manual choke, one electric choke), an Edelbrock RPM Air Gap dual quad intake manifold, Edelbrock’s high tech progressive linkage, a Russell fuel line, a high quality Edelbrock gasket set, and a carburetor stud kit.
EDELBROCK 20654 RPM AIR GAP INTAKE MANIFOLD
For more information, including other Edelbrock products, visit the Edelbrock page at performanceparts.com.
Now In Stock! Magnaflow 16773 Cat-Back System For 2007 Ford Explorer
Why wouldn’t you want Magnaflow’s trademark performance for your SUV? Magnaflow is now introducing a 2.5″ cat-back system for the 2007 4.0L V-6 Ford Explorer!
Perfectly built from mandrel-bent and finely polished stainless steel, this Magnaflow cat-back system delivers trusted and time-tested Magnaflow performance. Magnaflow’s system has a 4″ rolled-edge tip! The Magnaflow 16773 system comes complete with Front Extension, Mid Extension Kit, MagnaFlow Muffler, Tail Pipe and complete system hardware.
MAGNAFLOW 16773 CAT-BACK SYSTEM
For more information, including other Magnaflow products, visit the Magnaflow page at performanceparts.com.
Get High Oil Flow Rates In Your Ford Super Duty Truck With K&N HP-7009 Cartridge Oil Filter
The Ford F-550 Super Duty is in a class by itself.
Powered by a power stroke turbo diesel, it is considered the mega truck of the heavy hauling set. All the F-Series Super Duty models (F-550, F-450, F-350 and F-250) are big sellers for Ford. The company continues to manufacture them to supply consumer demand.
K&N Engineering has designed a cartridge oil filter (P/N HP-7009) for the Ford Super Duty Series. It is one of K&N’s first cartridge filters and designed to satisfy the needs of owners who want the very best oil filter available.
K&N HP-7009 Cartridge Oil Filter K&N Oil Filters are built from the ground up to trap harmful contaminants and allow for high oil flow rates. K&N’s HP-7009 slips into the OE housing for an easy fit. K&N’s Cartridge Oil Filters are covered by a limited warranty to be free of defects in material and workmanship when installed and replaced using the engine and equipment manufacturer’s recommended service interval.
K&N HP-7009 CARTRIDGE OIL FILTER
For more information, including other K&N products, visit the K&N page at performanceparts.com.
Edelbrock Performer Dual-Quad Crate Engine 45004 - Great For Street Rods & More!
Get a brand-new, fully-assembled engine that’s virtually ready to run and deliver classic Edelbrock performance right out-of-the-box. Available in seven power levels, Edelbrock Crate Engines include high-quality Edelbrock manifolds, carbs, cylinder heads, water pumps and camshafts. P/N 45004 is pictured.
Edelbrock Crate 45004 delivers 315 HP & 372 FT/LBS. of torque!
You can order the “Polished Package” or EnduraShine for a custom look. Each engine also comes standard with Edelbrock’s top-of-the-line carburetor, the ThunderSeries AVS. Performer Series carbs on street legal applications.
All engines include a new GM short-block with 4-bolt mains, and you can order yours with or without an Edelbrock water pump. Edelbrock aluminum valve covers are also included, complete with a custom badge. High quality MSD distributors and coils round off this unbeatable package.
EDELBROCK 45004 CRATE ENGINE 9.0:1
For more information, including other Edelbrock products, visit the Edelbrock page at performanceparts.com.
Lakewood Watts Link Bar 20505 For 2005 Ford Mustang Owners - A Perfect Upgrade!
The Lakewood Watts Link Bar (P/N 20505) is the perfect upgrade for owners of the 2005 Ford Mustang who want sharp and accurate handling and improved lap times. The Lakewood Watts Link Bar bolts in place of the standard factory panhard bar and brace, making installation quick and easy. It is 100% bolt-in!
The Lakewood Watts Link Bar has been specifically engineered to make sure the rear-end stayed perfectly centered and aligned when cornering, accelerating and braking. The adjustable design also allows you to change the roll center of the rear, which will result in better tracking.
For more information, including other Lakewood products, visit the Lakewood page at performanceparts.com.
More Street Performance With MSD’S 8247 Multi-Spark Coils For GM Gen-III LS2/LS7 Engines
Many said it couldn’t be done, but MSD has done it! At last, a high-performance, multi-spark replacement coil for the remarkable GM Gen-III small block!The advanced electronic controls of the Gen-III engine presented MSD engineers with a formidable challenge, as the control drivers are built into the OE coils. MSD was able to design an advanced circuit that operates with the factory electronics of the Gen-III engine while producing a higher output spark. Not only do you get a higher voltage spark, but the coil will deliver multiple sparks! Yes, that’s right: multiple spark discharge coils!
This version of MSD’s multi-spark coil was designed for GM’s LS2 variant and will provide more spark than the stock components. MSD coils produce up to three times the spark energy of the factory coils, and multiple sparks help keep the engine clean at an idle. MSD’s new kit (MSD 82478) provides everything you need to install the coils on your car, including eight coils and mounting hardware.
MSD 8247 MULTI-SPARK COIL FOR LS2/LS7 (individual), MSD 82478 COIL KIT (set of eight)
For more information, including more MSD products, visit the MSD page at performanceparts.com.
Flowmaster Announces American Thunder™ 17427 Performance Exhaust Kit For 2005-2007 Chevy Corvettes
Flowmaster has announced the release of their American Thunder™ performance exhaust kit for the ‘05-’07 Corvette (except Z06) with factory style quad tips. This axle-back system features 2.50-inch mandrel bent tubing and a pair of specifically tuned 5×12-inch, 50 Series™ mufflers. Flowmaster has reportedly engineered these mufflers with a unique Helmholtzs-tuning chamber to control interior noise, while delivering a deep and nicely aggressive exterior sound. Throughout extensive testing, this kit has provided significant horsepower and torque gains. It is easily installed because of its factory-style hardware. The kit is finished off with embossed 3.5-inch, rolled edge, double walled, polished stainless tips. As with all of their systems, Flowmaster has included the installation instructions and accessory hardware.
Flowmaster 17427 American Thunder™ Exhaust System
For more information, including other Flowmaster products, click here.
Centerforce 01161056 - New DFX clutch assembly
Centerforce has announced a new clutch assembly for the Chevy/Pontiac Camaro/Firebird:
Centerforce is proud to introduce this DFX clutch assembly for the 1984 to 1992 Chevrolet Camaro and Pontiac Firebird. The new DFX line is the latest series of extreme performance clutches from Centerforce designed as a direct bolt in for perfect fit and function. DFX scores big, not only with holding-capacity and strength, but also provides some of the best drivability from a race-inspired clutch. All DFX performance clutch systems utilize a patented Ball Bearing design for light pedal and quick release, Nodular Iron pressure plate rings and reinforcements designed to help prevent drive strap breakage and safety. The Paddle or button style disc has been through constant testing of different friction materials and hub designs to bring the best possible combination available to you. The DFX part number Centerforce 01161056 (Pressure Plate & Disc included) is now available. DFX Disc PN: Centerforce 23384161 and Cover PN: Centerforce 11360056 are also available as individual components.