Only The Best! Master Rebuilding Kit Edelbrock 1477 Available
Check out this Master Rebuilding Kit from Edelbrock, featured at performanceparts.com! The best maintenance and replacement parts you can buy for your Edelbrock carburetor come only from Edelbrock. These are the same parts Edelbrock installs at the factory so you know they will fit and work perfectly.
The kit includes parts and gaskets to rebuild any of Edelbrock’s square bore carbs.
Edelbrock 1477 Master Rebuilding Kit
For more information, including other Edelbrock products, visit the Edelbrock page at performanceparts.com.
New Dual Channel Wide Band O2 Kit 77063 From Accel/DFI
The new Accel/DFI O2 Control Kit is the fast and easy way to tune a carbureted or fuel injected engine for the most power and fuel efficiency!
Accel’s 77063 O2 Kit Operates either Bosch or NTK style linear sensor for added versatility. Every module of this all-new design is hand calibrated at the factory to ensure top-notch precision, repeatability, and reliability at an affordable price. It is also great for tuning Nitrous, Supercharged, or Turbocharged engines. Without knowing what the Air/Fuel ratio is, your chances of damaging your engine while tuning are greater.
DataMap software can monitor or record air/fuel ratio in one or two engine banks (depending on the model), engine RPM, and vehicle speed for EFI or carburetor stand alone applications — also includes two digital gauge outputs for remote A/F monitoring.
Accel 77063 Dual Channel Wide Band O2 Kit
For more information, including other Accel/DFI products, visit the Accel page at performanceparts.com.
Add 11.62 HP to 6.0L Suburban & Yukon Engines With K&N’s 63-3063 AirCharger Intake
K&N Engineering has released an AirCharger Air Intake System (K&N 63-3063) for the 2007 GMC Yukon XL 2500 6.0L V8 engine and the 2007 Chevrolet Suburban 2500 6.0L V8 engine.
“These are big cars with 6 liter engines,” said K&N Performance Kit Manager Bert Heck. “We wanted to build an intake kit that helps this engine with additional horsepower. Our dynamometer testing shows a horse power gain of 11.62 @ 5075 RPM.”
K&N’s 63-3063 rotationally molded polyethylene intake kit uses a large chrome top K&N Air Filter (K&N RF-1042). “Our K&N Air Intake System replaces the restrictive stock air filter. The included heat shield isolates the filter element from the heat of the engine,” said Heck. “This results in cooler air going into the engine resulting in more power.”
It takes less than 90 minutes to install most K&N air intakes with simple hand tools. K&N air intakes come with the famous K&N Million Mile Warranty.
K&N 63-3063 AIRCHARGER AIR INTAKE SYSTEM
For more information, including other K&N products, visit the K&N page at performanceparts.com.
Raw Power For Big-Block Chevys With Edelbrock’s New 20654 RPM Dual-Quad Air-Gap Intake Manifold
Featuring the all-new RPM Air-Gap Dual-Quad intake manifold from Edelbrock - welcome to more horsepower and torque for your big-block Chevy!
Now, it’s easier than ever to update your vehicle’s induction system to a dual quad set-up with these manifold and carburetor kits from Edelbrock. No more choosing different parts, hoping the’ll work together. You get a perfectly matched combination of carburetor and manifold packed into one box. They sparkle in Edelbrock’s ultra-bright “Endurashine” finish. Every kit is complete and bolt-on ready, including two Edelbrock 500cfm Thunder Series AVS carburetors (one manual choke, one electric choke), an Edelbrock RPM Air Gap dual quad intake manifold, Edelbrock’s high tech progressive linkage, a Russell fuel line, a high quality Edelbrock gasket set, and a carburetor stud kit.
EDELBROCK 20654 RPM AIR GAP INTAKE MANIFOLD
For more information, including other Edelbrock products, visit the Edelbrock page at performanceparts.com.
Muscle Car Sound & Performance For Your 1955-1957 Chevy With The Flowmaster 17172 Delta Force Exhaust System!
Flowmaster announces its new dual 3-inch Delta Force® race system (P/N 17172) for the classic 1955-56-57 Chevrolet with any V-8 engine. This dual high performance header-back system is designed to fit two or four door models, excluding the convertible & wagon. The head-pipe assembly is a flexible design allowing installation with factory-style down pipes or headers.
Flowmaster’s mandrel bent system features an H-pipe assembly, two Flowmaster Super 40™ Series mufflers and tailpipes and is finished off with a pair of Flowmaster-embossed stainless steel exhaust tips. All the necessary instructions, clamps and hangers are included for a trouble-free installation. This Flowmaster Delta Force® race system produces an aggressive muscle car tone, while opening your engine up to increased horsepower and torque!
FLOWMASTER 17172 DELTA FORCE EXHAUST SYSTEM
For more information, including other Flowmaster products, visit the Flowmaster page at performanceparts.com.
New 2007 Chevy Silverado/GMC Sierra 1500 Cat-back Systems From Magnaflow!
Magnaflow proves why they’re called the “Wide Open Performance” company with the release of two new cat-back systems for the 2007 4.8L/5.3L V8 Chevrolet Silverado & GMC Sierra 1500 EC-CC/SB!Specially crafted from mandrel-bent polished stainless steel, these Magnaflow cat-back systems deliver the famous and extensively tested Magnaflow performance you’ve come to expect. P/N 16740 offers a single system, while P/N 16741 offers a dual-pipe exhaust. The Magnaflow 16740 & 16741 systems comes complete with Front Extension, Mid Extension Kit, MagnaFlow Muffler, Tail Pipe and complete system hardware.
MAGNAFLOW 16740 (single); 16741 (dual) CAT BACK SYSTEMS
For more information, including other Magnaflow products, visit the Magnaflow page at performanceparts.com.
Now In Stock! Magnaflow 16773 Cat-Back System For 2007 Ford Explorer
Why wouldn’t you want Magnaflow’s trademark performance for your SUV? Magnaflow is now introducing a 2.5″ cat-back system for the 2007 4.0L V-6 Ford Explorer!
Perfectly built from mandrel-bent and finely polished stainless steel, this Magnaflow cat-back system delivers trusted and time-tested Magnaflow performance. Magnaflow’s system has a 4″ rolled-edge tip! The Magnaflow 16773 system comes complete with Front Extension, Mid Extension Kit, MagnaFlow Muffler, Tail Pipe and complete system hardware.
MAGNAFLOW 16773 CAT-BACK SYSTEM
For more information, including other Magnaflow products, visit the Magnaflow page at performanceparts.com.
Airaid’s New 300-209 Cold Air Intake For The 2007 Dodge 6.7L Cummins Diesel
Cummins, a legend among diesels, tough as nails, and willing to work overtime, the renowned 6.7L Cummins Turbo Diesel churns out a mighty 350 Horsepower and 650 lb-ft of torque, and features a class-exclusive factory-installed exhaust brake option. This beast provides 16,500 pounds of towing capacity without even breaking a sweat!
Since no pickup truck can have too much power, AIRAID Filter Company has unlocked some of the Ram’s “hidden” horsepower and torque with the development of an all-new Cold Air Intake System for the 6.7-liter Cummins Turbo Diesel (P/N 300-209).
AIRAID’s newest system features a Hi-Flow Inlet Tube which retains the factory mass air flow sensor and air intake temperature sensors while significantly improving air flow. In addition, the heart of the system is a washable and reusable AIRAID Premium Filter with SynthaFlow® Technology which has an optimized pleat depth and pleat count
for maximum flow and ultimate filtration, filtering out dirt down to 2 microns!
On the dyno, the new Dodge Diesel System generated an additional +15 rear wheel horsepower and additional 16 lb-ft of torque. Best of all, the system installs in minutes with ordinary hand tools.
AIRAID 300-209 COLD AIR INTAKE SYSTEM
For more information, including other Airaid products, visit the Airaid page at performanceparts.com.
2006 Corvette Z06 Makes 27.22 More Horsepower With K&N Air Intake System 63-3060!
The Chevrolet Corvette Z06 that served as the Daytona 500 pace car is mechanically identical to those available at dealerships. It is also the fastest vehicle ever offered by Chevrolet and General Motors. Drivers can go from 0-60 mph in 3.7 seconds with its 7.0 liter all aluminum racing inspired 505 horsepower engine. The Corvette’s top speed is 198 mph.
K&N Engineering, Inc. developed a 63 Series Air Charger Intake System (63-3060) for the 2006 Chevrolet Corvette Z06 7.0 liter V8 engine.
K&N dynamometer tests show a horsepower gain of 27.22 horsepower @ 5600 RPM on this super car. A Z06 is the closest experience many will have to the experience of sitting in a race car. The 63-3060’s aerodynamically engineered tube allows for more air to flow into the engine.
“The design of the K&N Air Charger Intake System had to meet and exceed the demands of a motor that makes 500 horsepower,” said K&N Performance Kit Manager Bert Heck. “In order to do this the K&N Air Filter included in this intake system is made from carbon fiber and very large. We also put an air foil in the large intake tube to provide extra strength and to help streamline the incoming air once it passes through the K&N Air Filter. Our K&N Air Intake System provides less restriction which results in more power.”
It takes less than 90 minutes to install most K&N Air Intake Systems with common tools.
For more information, including other K&N products, visit the K&N page at performanceparts.com.
Instant Horsepower With Airaid’s New Cold Air Intake System 400-203 For The 2005-2006 Ford Super Duty
Suppose you could boost the horsepower and torque from your 2005-2007 Ford Super Duty 6.8L V-10 with one simple, bolt-on system? AIRAID can make that happen with their all-new air intake for the Ford Super Duty V-10 equipped trucks. Patterned after AIRAID’s new 7.3L Power Stroke system, the new Super Duty V-10 system features a computer-designed mass air flow adaptor with a built in velocity cone, made from durable cross-linked, high-density polyethylene, that delivers maximum air flow to the engine.
The system also incorporates a newly designed washable and reusable AIRAID Premium Air Filter for maximum air flow and filtration. On the Mustang Dyno, this new Ford Super Duty V-10 system generated an additional 13 rear wheel horsepower and an additional 33 lb-ft of torque. Best of all, the system installs in minutes with ordinary hand tools and comes with specially-blended gauze layers combined with a SynthaFlow® dry synthetic layer that consistently filters down to two microns. All AIRAID Filters are made from hand-poured urethane to prevent cracking and shrinkage in the extreme conditions found under the hood on most heavy duty trucks.
AIRAID 400-203 COLD AIR INTAKE SYSTEM
For more information, including other Airaid products, visit the Airaid page at performanceparts.com.