Performance Parts News

The Hurst Indy 3-speed shifters are designed to fit most popular passenger cars with 3-speed manual transmissions. These shifters are excellent for converting column shifters or for replacing floor shifters. They sport an attractive chrome-plated stick and gate, and come with all hardware and instructions.

• Spring loaded gate for ease of operation
• Short precise throws for less stick travel
• Attractive chrome-plated stick (3/8-24 thread) can be adjusted to many positions
• Excellent for replacing floor shifter or for conversion column shifter
• Fits most popular passenger cars with 3-speed manual transmissions
• All components are plated for protection
• Complete with shifter boot, hardware and easy-to-follow installation guide

Hurst 5010002 3 Speed Shifter Indy SSA Universal

For more information, including other Hurst products, visit the Hurst page at performanceparts.com.

Superchips proudly introduces the Tirepaq (Superchips 2816) for 1996-2007 gas-powered GM V8 trucks and SUVs. Superchip’s Tirepaq corrects your vehicle’s speedometer readings electronically to compensate for non-factory wheels, tires and rear-end gear swaps. It also intuitively adjusts shift patterns to improve drivability when aftermarket wheels, tires and gears are installed. Superchips Tirepaq unit will never be out-of-date because you can update your Tirepaq on the internet!

Superchips Tirepaq programmer can also be used to retrieve and clear annoying “check engine” lights. The Tirepaq programmer can also be upgraded (at an additional cost) to become the Superchips Flashpaq performance programmer.

SUPERCHIPS TIREPAQ 2816 SPEEDOMETER CORRECTION DEVICE

For more information, including other Superchips products, visit the Superchips page at performanceparts.com.

Check out this Edelbrock 1477 Master Rebuilding Kit from Edelbrock, featured at Performance Parts ! The best maintenance and replacement parts you can buy for your Edelbrock carburetor come only from Edelbrock. These are the same parts Edelbrock installs at the factory so you know they will fit and work perfectly.

The kit includes parts and gaskets to rebuild any of Edelbrock’s square bore carbs.

Edelbrock 1477 Master Rebuilding Kit

For more information, including other Edelbrock products, visit the Edelbrock page at Performance Parts.

The new Accel/DFI O2 Control Kit is the fast and easy way to tune a carbureted or fuel injected engine for the most power and fuel efficiency!

Accel’s 77063 O2 Kit Operates either Bosch or NTK style linear sensor for added versatility. Every module of this all-new design is hand calibrated at the factory to ensure top-notch precision, repeatability, and reliability at an affordable price. It is also great for tuning Nitrous, Supercharged, or Turbocharged engines. Without knowing what the Air/Fuel ratio is, your chances of damaging your engine while tuning are greater.

DataMap software can monitor or record air/fuel ratio in one or two engine banks (depending on the model), engine RPM, and vehicle speed for EFI or carburetor stand alone applications — also includes two digital gauge outputs for remote A/F monitoring.

Accel 77063 Dual Channel Wide Band O2 Kit

For more information, including other Accel/DFI products, visit the Accel page at performanceparts.com.

Proform has developed new Chevrolet Bowtie Die Cast Valve Covers (Proform 141-108) for the small-block Chevy. They’re tall, cast in aluminum and polished with the classic Chevy logo emblazoned on the top. They come with GM’s stamp of approval!

Why not get rid of your boring factory valve covers? Proform’s premium quality covers feature a sturdy die-cast aluminum casing with thick gasket rails to prevent oil leaks. Proform’s 141-108 are equipped with oil drippers and GM authorized baffles so you can be sure they’ll work great! The Proform covers have recessed Bowtie and Chevy red logos, and they’re available in your choice of chrome-plated, black crinkle, or polished finishes. These are sold as a pair.

Proform 141-108 Chevrolet Bowtie Die Cast Valve Covers

For more information, including other Proform products, visit the Proform page at performanceparts.com.

K&N Engineering has released an AirCharger Air Intake System (K&N 63-3063) for the 2007 GMC Yukon XL 2500 6.0L V8 engine and the 2007 Chevrolet Suburban 2500 6.0L V8 engine.

“These are big cars with 6 liter engines,” said K&N Performance Kit Manager Bert Heck. “We wanted to build an intake kit that helps this engine with additional horsepower. Our dynamometer testing shows a horse power gain of 11.62 @ 5075 RPM.”

K&N’s 63-3063 rotationally molded polyethylene intake kit uses a large chrome top K&N Air Filter (K&N RF-1042). “Our K&N Air Intake System replaces the restrictive stock air filter. The included heat shield isolates the filter element from the heat of the engine,” said Heck. “This results in cooler air going into the engine resulting in more power.”

It takes less than 90 minutes to install most K&N air intakes with simple hand tools. K&N air intakes come with the famous K&N Million Mile Warranty.

K&N 63-3063 AIRCHARGER AIR INTAKE SYSTEM

For more information, including other K&N products, visit the K&N page at performanceparts.com.

New technology to go old school! When you retro-fit a Ford 4.6L or 5.4L (SOHC/DOHC) with a carbureted intake manifold, you’ll need this new MSD Controller to handle the ignition chores.

The Controller plugs into the coil packs and sensors of the engine for a direct installation. From a PC, using MSD’s Pro-Data+ software, you can program custom timing curves, a step retard, two step and even a vacuum advance. A great system for street rods and retro muscle cars.

Other features include…

❚ Fire the coils and control the timing on Ford Modular engines with carburetors.
❚ Map a timing curve and a vacuum advance to meet your vehicle’s needs.
❚ Connects directly to the coils, crank, cam and MAP sensors for an easy installation.
❚ Program timing curves, rpm limits and a step retard with your PC.

MSD 6011 6-MOD INGNITION CONTROLLER

For more information, including other MSD products, visit the MSD page at performanceparts.com.

ACCEL/DFI announces the availability of an all-new Power Processor — a revolutionary, ultra-light, handheld Flash Tool which is pre-programmed with 3 tune files each for the most popular Ford models. Designed with the latest available technology for unparalleled high-performance tuning, this all-in-one OBD II Flash Tool/Power Processor is available for most 1996 to 2006 Ford cars and trucks, both gasoline and diesel applications.

The ACCEL/DFI Power Processor significantly increases horsepower and torque, improves fuel economy, and optimizes operation of the engine and transmission. It also allows easy reading, clearing, and diagnosis of DTC trouble codes/Check Engine Lights, and has a USB interface to ensure quick file transfer. Power up your vehicle in less than 10 minutes, no tools needed - just plug it in!

Tuning available for all grades of fuel including a performance tune for increased power and drivability. Features include the ability to adjust shift points, adjust shift firmness, raise the top speed and engine rev limiters, recalibrate speedometers for rear gear change, and read and clear diagnostic trouble codes. Accel 79100 Fits most Ford Applications:

• 2003 to 2006 6.0L Diesel Trucks
• 1999 to 2003 7.3L Diesel Trucks
• 1996 to 2006 Mustang/Cobra
• 1999 to 2004 Lightning/Harley Trucks
• 1996 to 2006 F-Series Trucks
• 1996 to 2006 SUV’s including Excursion, Expedition, and Explorer.
• 1999 to 2004 Ford Focus Zetec
• 2003 to 2004 SVT Focus
• 2003 to 2004 Marauder
• 2005 to 2006 Ford GT Supercar
• 1996 to 2006 Ford *Other gas cars including T-bird and Lincoln LS

ACCEL 79100 FORD POWER PROGRAMMER

For more information, including other Accel products, visit the Accel page at performanceparts.com.

Featuring the all-new RPM Air-Gap Dual-Quad intake manifold from Edelbrock - welcome to more horsepower and torque for your big-block Chevy!

Now, it’s easier than ever to update your vehicle’s induction system to a dual quad set-up with these manifold and carburetor kits from Edelbrock. No more choosing different parts, hoping the’ll work together. You get a perfectly matched combination of carburetor and manifold packed into one box. They sparkle in Edelbrock’s ultra-bright “Endurashine” finish. Every kit is complete and bolt-on ready, including two Edelbrock 500cfm Thunder Series AVS carburetors (one manual choke, one electric choke), an Edelbrock RPM Air Gap dual quad intake manifold, Edelbrock’s high tech progressive linkage, a Russell fuel line, a high quality Edelbrock gasket set, and a carburetor stud kit.

EDELBROCK 20654 RPM AIR GAP INTAKE MANIFOLD

For more information, including other Edelbrock products, visit the Edelbrock page at Performance Parts.

Crane Cams is proud to announce the release of a new, “super premium” LS1/LS6 spring for high-performance applications. Made of “super clean,” extra-high tensile chrome-silicon wire, the 144833-16 dual valve spring features a higher spring rate and improved harmonics in the 6000-7200 RPM range. The Crane Cams “super-premium” material assures very long life even with high-lift, high-RPM applications.

With dimensions very similar to Crame Cams’ 144832-16 spring, the 144833-16 spring does not replace the former, but compliments it. The new spring is intended for serious high-performance applications where maximum reliability is required.

CRANE CAMS 144833-16 DUAL VALVE SPRING

For more information, including other Crane Cams products, visit the Crane Cams page at performanceparts.com.