Performance Parts News

Magnaflow proves why they’re called the “Wide Open Performance” company with the release of two new cat-back systems for the 2007 4.8L/5.3L V8 Chevrolet Silverado & GMC Sierra 1500 EC-CC/SB!Specially crafted from mandrel-bent polished stainless steel, these Magnaflow cat-back systems deliver the famous and extensively tested Magnaflow performance you’ve come to expect. P/N 16740 offers a single system, while P/N 16741 offers a dual-pipe exhaust. The Magnaflow 16740 & 16741 systems comes complete with Front Extension, Mid Extension Kit, MagnaFlow Muffler, Tail Pipe and complete system hardware.

MAGNAFLOW 16740 (single); 16741 (dual) CAT BACK SYSTEMS

For more information, including other Magnaflow products, visit the Magnaflow page at performanceparts.com. 

While heat creates horsepower it can also create internal engine chaos! Keeping your Ford small-block running within the correct heat range, during hot summer driving or off-road competition, is imperative. Proform/Specialty Auto Parts has the solution to overheating with this all new 12-volt electric water pump (P/N 68220BK). To add a custom touch, it’s also available in blue, red, chrome or polished. Dress up and cool down your engine at the same time!

This easy to install Proform pump will move 35+ gallons of water per minute while drawing only 6-Amps. These lightweight pumps are made from durable die-cast aluminum and then epoxy powder coated for corrosion resistance and a show quality appearance. Each pump includes a free billet aluminum backing plate, mating weather-tight connector and inlet fitting.

PROFORM 68220BK HIGH-VOLUME ELECTRIC WATER PUMP

For more information, including other Proform products, visit the Proform page at performanceparts.com.

Why wouldn’t you want Magnaflow’s trademark performance for your SUV? Magnaflow is now introducing a 2.5″ cat-back system for the 2007 4.0L V-6 Ford Explorer!

Perfectly built from mandrel-bent and finely polished stainless steel, this Magnaflow cat-back system delivers trusted and time-tested Magnaflow performance. Magnaflow’s system has a 4″ rolled-edge tip! The Magnaflow 16773 system comes complete with Front Extension, Mid Extension Kit, MagnaFlow Muffler, Tail Pipe and complete system hardware.

MAGNAFLOW 16773 CAT-BACK SYSTEM

For more information, including other Magnaflow products, visit the Magnaflow page at performanceparts.com.

The Ford F-550 Super Duty is in a class by itself.

Powered by a power stroke turbo diesel, it is considered the mega truck of the heavy hauling set. All the F-Series Super Duty models (F-550, F-450, F-350 and F-250) are big sellers for Ford. The company continues to manufacture them to supply consumer demand.

K&N Engineering has designed a cartridge oil filter (P/N HP-7009) for the Ford Super Duty Series. It is one of K&N’s first cartridge filters and designed to satisfy the needs of owners who want the very best oil filter available.

K&N HP-7009 Cartridge Oil Filter K&N Oil Filters are built from the ground up to trap harmful contaminants and allow for high oil flow rates. K&N’s HP-7009 slips into the OE housing for an easy fit. K&N’s Cartridge Oil Filters are covered by a limited warranty to be free of defects in material and workmanship when installed and replaced using the engine and equipment manufacturer’s recommended service interval.

K&N HP-7009 CARTRIDGE OIL FILTER

For more information, including other K&N products, visit the K&N page at performanceparts.com.

Get a brand-new, fully-assembled engine that’s virtually ready to run and deliver classic Edelbrock performance right out-of-the-box. Available in seven power levels, Edelbrock Crate Engines include high-quality Edelbrock manifolds, carbs, cylinder heads, water pumps and camshafts. P/N 45004 is pictured.

Edelbrock Crate 45004 delivers 315 HP & 372 FT/LBS. of torque!

You can order the “Polished Package” or EnduraShine for a custom look. Each engine also comes standard with Edelbrock’s top-of-the-line carburetor, the ThunderSeries AVS. Performer Series carbs on street legal applications.

All engines include a new GM short-block with 4-bolt mains, and you can order yours with or without an Edelbrock water pump. Edelbrock aluminum valve covers are also included, complete with a custom badge. High quality MSD distributors and coils round off this unbeatable package.

EDELBROCK 45004 CRATE ENGINE 9.0:1

For more information, including other Edelbrock products, visit the Edelbrock page at performanceparts.com.

The Lakewood Watts Link Bar (P/N 20505) is the perfect upgrade for owners of the 2005 Ford Mustang who want sharp and accurate handling and improved lap times. The Lakewood Watts Link Bar bolts in place of the standard factory panhard bar and brace, making installation quick and easy. It is 100% bolt-in!

The Lakewood Watts Link Bar has been specifically engineered to make sure the rear-end stayed perfectly centered and aligned when cornering, accelerating and braking. The adjustable design also allows you to change the roll center of the rear, which will result in better tracking.

LAKEWOOD 20505 WATTS LINK BAR

For more information, including other Lakewood products, visit the Lakewood page at performanceparts.com.

Cummins, a legend among diesels, tough as nails, and willing to work overtime, the renowned 6.7L Cummins Turbo Diesel churns out a mighty 350 Horsepower and 650 lb-ft of torque, and features a class-exclusive factory-installed exhaust brake option. This beast provides 16,500 pounds of towing capacity without even breaking a sweat!

Since no pickup truck can have too much power, AIRAID Filter Company has unlocked some of the Ram’s “hidden” horsepower and torque with the development of an all-new Cold Air Intake System for the 6.7-liter Cummins Turbo Diesel (P/N 300-209).

AIRAID’s newest system features a Hi-Flow Inlet Tube which retains the factory mass air flow sensor and air intake temperature sensors while significantly improving air flow. In addition, the heart of the system is a washable and reusable AIRAID Premium Filter with SynthaFlow® Technology which has an optimized pleat depth and pleat count
for maximum flow and ultimate filtration, filtering out dirt down to 2 microns!

On the dyno, the new Dodge Diesel System generated an additional +15 rear wheel horsepower and additional 16 lb-ft of torque. Best of all, the system installs in minutes with ordinary hand tools.

AIRAID 300-209 COLD AIR INTAKE SYSTEM

For more information, including other Airaid products, visit the Airaid page at performanceparts.com.

The Ford F150 is the go-to choice for many consumers. For business or commercial needs, the popular truck is a reliable workhorse. Others see it as pickup that can handle every day driving as easily as it tows and hauls. In fact, the F-150 has been one of the most popular vehicles sold in the United States for nearly every year of the past three decades.

K&N Engineering has developed a 63-Series AirCharger Air Intake System (63-2572) for the 2005 and 2006 Ford F150 4.2 liter V6 engine. K&N dynamometer tests show a horsepower gain of 7.41 @ 4106 rpm.

“The K&N AirCharger Intake System replaces the factory intake tube and air box,” said K&N Performance Kit Manger Bert Heck.  “We use an aerodynamic tube and heat shield with an over-sized K&N Air Filter.  Our Air Intake System is easy to mount because we used available factory mounting points.  The large K&N air filter and the tube’s aerodynamic design contributed heavily to the 7.41 horsepower gain.”

K&N 63-2572 AIR CHARGER INTAKE SYSTEM

For more information, including other K&N products, visit the K&N page at performanceparts.com.

Welcome to raw performance! Magnaflow introduces their first cat-back system for the 2007 3.8L V-6 Jeep Wrangler. Built perfectly with mandrel-bent polished stainless steel and delivering trusted Magnaflow performance, this system has a 3.5″ rolled edge tip! The Magnaflow 16751 system comes complete with Front Extension, Mid Extension Kit, MagnaFlow Muffler, Tail Pipe and complete system hardware.

MAGNAFLOW 16751 CAT-BACK SYSTEM

For more information, including other Magnaflow products, visit the Magnaflow page at performanceparts.com.

When the production of Johnson-style flat tappet lifters resumed just over a year ago, builders and mechanics rejoiced that they had returned. Considered by many to be the highest quality and most versatile tappets on the market, they were never available for classic Chrysler engines. COMP Cams has proudly announced the return of the Johnson-style tappets for classic Chrysler (273-360cid small-block and 383-440cid big-block) engines for street and racing applications.

Built to exact tolerances to create an extremely durable product, COMP Cams new lifters feature a precision-ground crown on the lifter face to ensure proper break-in and long life. For many years, Johnson-style lifters set the standard for solid flat tappets, and now, the same high-quality lifters are available for your Chrysler engine.

COMP CAMS 2921-16 CHRYSLER PERFORMANCE SOLID MECHANICAL LIFTERS

For more information, including other COMP Cams products, visit the COMP Cams page at performanceparts.com.